A. Warmup 1.5 - 2.4m2

Warmup Loose Wire System for Tile and Stone Floors

This kit comprises of 1 x DWS300 to cover an area of 1.5 - 2.4m2.

Warmup designs their systems using a 2mm, ultra-thin, dual-core heating element.  The small cross-section of the element allows it to be installed in a matter of hours without raising floor levels.

There is no need to dig up the floor and no need to mix concrete.  Simply fix the heating element to the subfloor, tile straight over and say goodbye to cold feet for good! 

We strongly recommend that you use the Insulation Boards with this product, as they can lower your running costs by as much as 50%!

• For more information please refer to the Warmup Brochure
• Technical information on the Loose Wire System

Please note:

• For areas over the specified sizes, you would need to make up the areas with additional heaters and add on the additional price. So for instance, for 30m2 of the Loose Wire system, you would use a 22.0m - 25m + 4.5m - 5.9m.
• Warmup Thermostat sold separately. 

You may also be interested in this/these product(s)

Warmup XSTAT Thermostat - White

£104.99   £78.74
You Save: 25.00%

Warmup 10mm Insulation Board

£20.49   £15.37
You Save: 25.00%

weber.set plus (grey)

£18.46

weber.set rapid plus (grey)

£18.64

Warmup 3iE Thermostat

£139.99   £104.99
You Save: 25.00%