Product Details
DURAL Premium Movement Joint
2.5 metre length
Depth 3mm – 50mm (Request), Width 11.5mm
This expansion joint is suitable for ceramics, slate and natural stone. Available in steel, brass and aluminium, this expansion joint is designed and manufactured to exceed the requirements of BS 5385. Using the latest technology to produce accomodation joints that allow the designer and contractor total confidence in the performance of the profile.
1. For floor areas in excess of 2m x 2m where tiling abuts walls or restraining features, the use of a perimeter joint is recommended. (Please call for more information)
2. Any existing movement joints in the sub floor must be carried through to the tiled surface. This is advisable where crack inducers or other stress relieving devices are present. A movement joint should also be located where a change in substrate occurs.
3. Taking points 1 and 2 into account, the resulting fields should be as square as possible. The ratio of the length of the sides should not exceed 2:1. The exception to this is when tiling areas such as corridors. Intermediate joints should be no further apart than 10m.
4. The correct size of movement joint should allow for the thickness of the tile and adhesive bed. The surface of the profile must not protrude above the tiled surface.
Please select your epoxy infill colour from the RAL colour chart; these are made to order: RAL Colour Chart
However STOCK colours are:
RAL 9004 – Signal Black
RAL 7043 – Traffic Grey
RAL 7039 – Quartz Grey
RAL 7038 – Agate Grey
RAL 7035 – Light Grey
RAL 1014 – Ivory
RAL 1015 – Light Ivory
RAL 1013 – Oyster White
RAL 1004 – Golden Yellow
RAL 1001 – Beige
Please contact us to obtain your chosen colours.
Product Code | N/A |
---|---|
Categorised In | Bright Ideas, Durabase Matting / Accessories, Tools & Accessories |
Bright Ideas | Listellos |
Dural | Expansion Joints |
Product Type | Dural |
Type of Joint | Aluminium, Brass, Stainless Steel |