Weber Floor DPM is an innovative way to suppress moisture and due to it being epoxy, it creates a strong bond to the subfloor. This highly moisture tolerant, epoxy resin damp proof system is designed perfectly to bond to a concrete floor with a high degree of moisture. Furthermore, this can be used down to 5°C, allowing work to continue during winter.
New concrete or screed must be left for a minimum of 7 days before application of the membrane. Rough or uneven surfaces should be levelled before applying the membrane and this should be left a minimum of 24 hours to dry before applying the DPM. Power floated subfloors should be shot blasted before application of DPM to assist adhesion.
Please note this is a two coat system.
Data Sheet: weber floor DPM datasheet
Safety Sheet: SDS44P3177_-_weberfloor_DPM_hardener-_-GB
The tile quantities suggested are based on the dimensions that you enter and it is advisable that you always make allowances for cuts and breakages. Manufacturers’ averages are used to present quantities for adhesives and grouts and as surfaces may be uneven, more than the estimated quantity of adhesive and grout given here may be required. Atlas Ceramics can therefore accept no liability for over or under ordering. View our full tile calculator page for further details and instructions.
Returns & Delivery
Returns & Delivery
How much is delivery?
Orders up to 25kg - £9.95 inc. VAT
Orders over 25kg - £39.95 inc. VAT
FREE delivery is applied to sample tiles/mosaics and on orders of £250 and over including VAT (Exclusions may apply on these prices, Express Delivery is exempt from this).
Do I have to sign for my delivery?
Yes, it is necessary to sign for your order. Please note that your signature indicates to us that you have received and checked the quantities and products and have confirmed that all is present and correct.
View our full delivery information page for further details »
In addition to your right to cancel your order we accept returns in accordance with our returns policy set out on our terms & conditions page.