Search

Search

Cart 0

Your cart

Review and proceed to checkout

Tile Calculator

It’s so easy to calculate your requirements for tiles, borders, adhesives and grouts. Simply enter your measurements for each area of wall of floor and then click Calculate. You will instantly see how many tiles you need for your project, the quantity of borders for the perimeter of the room and how much adhesive and grout you require* (based on manufacturers’ averages).

We recommend that you allow 10% extra for tiling walls and floors and 15% extra if tiling a diagonal floor.

If you need a hand in working out your requirements from measurements you have, or even if you would like help converting from feet and inches to metres and centimetres, we are always here to help. Please call: 01425 621173, fax: 01425 621193 or email us at info@atlasceramics.co.uk

Disclaimer
The tile quantities suggested are based on the dimensions that you enter and it is advisable that you always make allowances for cuts and breakages. Manufacturers’ averages are used to present quantities for adhesives and grouts and as surfaces may be uneven, more than the estimated quantity of adhesive and grout given here may be required. Please refer to the product sheets found on each of the product pages if in any doubt. Atlas Ceramics can therefore accept no liability for over or under ordering.

*Adhesive (pre-mix) allows for tiling carried out with a notched trowel – 6mm x 6mm @ 12mm centres. Adhesive (powder) allows for a variable solid bed, please use the quantity denoted by the Adhesive (pre-mix) field if you are using a 6mm trowel to lay your tiles.

[show-calculator]