Please note delivery is between 3-5 working days.
weberfloor 4310 fibre flow is a pump or hand applied, self-smoothing, fibre-reinforced base or renovation screed for floors, which gives a strong base layer for receiving tiles or a thin topping screed. The product is formulated from special cements, aggregates, supplementary binders and chemical admixtures.
weberfloor 4310 fibre flow is designed for the use in residential and commercial areas allowing a much earlier overlay compared to traditional sand/ cement, concrete or anhydrite screeds. It is ideal for the renovation of existing floors and floating floor constructions.
Features and Benefits
• For application depths between 5-50mm
• Pump or hand applied
• Rapid drying
• Foot traffic after 1-3 hours
• Tile after 12 hours
• Final floor covering installed after 1-3 days in normal conditions
• Fibre modified for added durability
• Low alkalinity
• Low emissions
Please note delivery is between 10-14 days.
Data Sheet: weber fibre flow datasheet
Safety Sheet: SDS_-weber_floor_4310_-GB